Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Synology DS220j
Summary of Contents for Synology DS220j
- Page 1 Synology NAS DS220j Hardware Installation Guide...
-
Page 2: Table Of Contents
Chapter 2: Hardware Setup Tools and Parts for Component Installation Install Drives Start Up Your Synology NAS LED Indicator Table Chapter 3: System Maintenance Initial Troubleshooting Guide Chapter 4: Install DSM on Synology NAS Install DSM with Web Assistant Learn More Synology_HIG_DS220j_20190916... -
Page 3: Package Contents
Chapter Before You Start Thank you for purchasing this Synology product! Before setting up your new DS220j, please check the package contents to verify that you have received the items below. Also, make sure to read the safety instructions carefully to avoid harming yourself or damaging your Synology NAS. -
Page 4: Synology Ds220J At A Glance
1. Press to power on the Synology NAS. Power Button 2. To power off the Synology NAS, press and hold until you hear a beep sound and the Power LED starts blinking. Disposes of excess heat and cools the system. If the fan malfunctions, the Synology NAS will emit a beeping sound. -
Page 5: Hardware Specification
• External: ext4, ext3, FAT, NTFS, HFS+, exFAT • Basic • JBOD • RAID 0 • RAID 1 Supported RAID Types • Synology Hybrid RAID (1-Disk Fault Tolerance) • FCC Class B • CE Class B • BSMI Class B Agency Certifications •... -
Page 6: Safety Instructions
Safety Instructions Keep away from direct sunlight and away from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity. Place the product right side up at all times. Do not place near any liquids. Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or aerosol cleaners. -
Page 7: Spare Parts
Spare Parts www.synology.com/products/spare_parts Visit if you need to replace system fans, disk trays, or power supply units. Model Name Picture Description Adapter 60W_1 Adapter 60W Level VI Disk Holder (Type C) 2.5" Disk Holder Type C Fan 92*92*25_1 System Fan... -
Page 8: Chapter 2: Hardware Setup
Secure the drive with the screws provided. • For 3.5” drives with 2 screw holes on each side (indicated below): a Place the HDD bracket on your Synology NAS, and fasten the bracket to the Synology NAS with the screws provided. - Page 9 b Slide the drive into the hard drive bay, and push it all the way until it’s firmly connected to the SATA connector. Secure the drive with the screws provided. • For 2.5” drives: a Place the drive in the 2.5" Disk Holder (Type C, sold separately), and then tighten the 2.5" screws to secure the drive.
-
Page 10: Start Up Your Synology Nas
5 Replace the upper case, and tighten the screws on the back panel. Start Up Your Synology NAS 1 Connect one end of the AC power adapter to the power port of your Synology NAS. Connect the other end to a power outlet. -
Page 11: Led Indicator Table
Note: Please try to restart your Synology NAS or re-insert the drive(s), and then run the HDD/SSD manufacturer's diagnostic tool to check the health status of the drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains unresolved, please contact Synology Technical Support for help. -
Page 12: Chapter 3: System Maintenance
• What should I do if my Synology NAS cannot recognize installed drives? • How do I know whether the problem is with my Synology NAS or drive when drive errors occur? • Memory • How can I run a memory test on my Synology NAS? •... -
Page 13: Chapter 4: Install Dsm On Synology Nas
3 Enter either of the following into the address bar of your browser: find.synology.com synologynas:5000 4 Web Assistant will be launched in your web browser. It will search for and find the Synology NAS within the local network. The status of the DS220j should be Installed. - Page 14 Section 5. License Limitations. The license set forth in Sections 1, 2 and 3 applies only to the extent that you have ordered and paid for the Product and states the entirety of your rights with respect to the Software. Synology reserves all rights not expressly granted to you in this EULA.
- Page 15 Arbitration Law and related enforcement rules of the country in which Synology Inc. was organized. In such cases, the arbitration will be limited solely to the dispute between you and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis.
- Page 16 Section 3. Limited Warranty and Remedies 3.1 Limited Warranty. Subject to Section 3.2, Synology warrants to the Customer that each Product (a) will be free of material defects in workmanship and (b) under normal use will perform substantially in accordance with Synology's published specifications for the Product during the Warranty Period.
- Page 17 Section 4. Limitations of Liability 4.1 Force Majeure. Synology will not be liable for, or be considered to be in breach of or default under this Warranty on account of, any delay or failure to perform as required by this Warranty as a result of any cause or condition beyond its reasonable control (including, without limitation, any act or failure to act by Customer).
- Page 18 Association, except as otherwise provided below. The arbitration will be conducted before a single arbitrator, and will be limited solely to the dispute between Customer and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis.
- Page 19 FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 20 この装置は、クラス B 機器です。この装置は、住宅環境で使用することを 目的 としていますが、この装置がラジオやテレビジョン受信機に近接して使 用され ると、受信障害を引き起こすことがあります。 取扱説明書に従って正しい取り扱いをして下さい。 VCCI 一 B...