Starting A Programme; Unloading Laundry From The Tumble Dryer; End Of The Programme; Removing The Laundry - Miele PDR 510 EL Operating And Installation Instructions

Starting a pro-
gramme
Energy saving
End of the pro-
gramme
Removing the
laundry

Care notes

4. Starting a programme
Touch the flashing Start/Stop sensor control.

The Start/Stop sensor control will light up.
Programme sequence
- If Delay start has been selected, the Delay start time will start to
count down first.
- The programme starts.
Laundry items and fabrics can wear out unnecessarily.
Avoid overdrying the laundry.
After a programmed time, the indicators dim. The Start/Stop sensor
control flashes slowly.
Touch the Start/Stop sensor control to switch the indicators back

on.
Energy saving for the indicators will not affect a running programme.
5. Unloading laundry from the tumble dryer
The tumble dryer can be configured so that a buzzer sounds at the

end of the programme.

At the end of the programme ( is indicated on the time display),
the laundry has cooled down and can be removed.
If Anti-crease has been selected, the drum keeps rotating at intervals.
This reduces creasing if the laundry cannot be removed straight
away.
The tumble dryer will switch off automatically after the programmed
time after the end of a programme.
Open the door.

Remove everything from the drum.

Items left in the tumble dryer could be damaged by overdrying
when the tumble dryer is used the next time.
Always remove all items from the drum.
To switch off the tumble dryer, turn the rotary control to the  posi-

tion.
This tumble dryer requires regular maintenance, particularly if it is
used on a continuous basis. Please see "Cleaning and care" for de-
tails.
Drying
25