Table of Contents
Advertisement
„ Air fi lter
1.
Pull out the air fi lters.
• Open the upper front panel.
• Set the panel support plate between the ribs on
the unit to fi x the upper front panel.
• Push the fi lter tab at the center of each air fi lter a
little upwards, then pull it down.
Back of the upper
front panel
Panel support plate
Ribs
1) Pull
2.
Wash the air fi lters with
water or clean them with a
vacuum cleaner.
• It is recommended to clean the air fi lters every
2 weeks.
CAUTION
• Do not touch the aluminium fi ns by bare hand at the time of dismounting or mounting the fi lter.
3) Pull down
Filter tab
2) Push
If the dust does not come off easily
• Wash the air fi lters with neutral detergent thinned with
lukewarm water, then let them dry in the shade.
• Be sure to remove the titanium apatite photocatalytic
air-purifying fi lter. Refer to "Titanium apatite
photocatalytic air-purifying fi lter" on the next page.
3.
Set the fi lters as they were
and close the upper front
panel.
• Return the panel support plate to its previous
position.
• Lower the lower front panel to the original
position.
• Close the upper front panel slowly.
• Press the upper front panel at both sides.
32
Advertisement
Table of Contents
