Table of Contents
Advertisement
NOTE
„ Notes on ECONO operation
• ECONO operation can only be set when the unit is running. Pressing
LCD.
• ECONO operation is a function which enables effi cient operation by limiting the power consumption of the outdoor unit (operating frequency).
• ECONO operation functions in AUTO, COOL, DRY, and HEAT operation.
• POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• If the power consumption level is already low, switching to ECONO operation will not reduce the power consumption.
„ Notes on OUTDOOR UNIT QUIET operation
• If using a multi system, the OUTDOOR UNIT QUIET operation will work only when this function is set on all operated indoor units. However,
if using priority room setting, refer to "Note for Multi System".
• This function is available in COOL, HEAT, and AUTO operation.
This is not available in FAN and DRY operation.
• POWERFUL operation and OUTDOOR UNIT QUIET operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• Even if the operation is stopped by using the remote controller or the indoor unit ON/OFF switch when using OUTDOOR UNIT QUIET
operation, "
" will remain lit on the remote controller display.
• OUTDOOR UNIT QUIET operation will not reduce the frequency nor fan speed if they already are operating at reduced levels.
• This operation is performed with lower power and therefore may not provide a suffi cient cooling (heating) effect.
„ To start operation
Press
• Each time
is pressed, a different setting option is displayed on the LCD.
ECONO
OUTDOOR UNIT
„ To cancel operation
Press
and select the desired mode.
Combination
QUIET
until no icon is displayed.
causes the settings to be cancelled, and "
Page 29
blank
No Setting
" disappears from the
20
Advertisement
Table of Contents
