Sharp MX-C528F User Manual page 167

Use printer menus
Menu item
Mac Binary PS
Auto*
On
Off
Energy Efficient Ethernet
On
Off
Auto*
Note: An asterisk (*) next to a value indicates the factory default setting.
TCP/IP
Note: This menu appears only in network printers or printers attached to print servers.
Menu item
Set Hostname
Domain Name
Allow DHCP/BOOTP to update
NTP server
On*
Off
Zero Configuration Name
Enable Auto IP
Off
On*
DNS Server Address
Backup DNS Address
Backup DNS Address 2
Backup DNS Address 3
Domain Search Order
Enable DDNS
Off*
On
DDNS TTL
Default TTL
DDNS Refresh Time
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
•
Auto processes print jobs from computers using either
Windows or Macintosh operating systems.
•
Off filters PostScript print jobs using the standard protocol.
Reduce power consumption when the printer does not receive data
from the Ethernet network.
Description
Set the current TCP/IP host name.
Set the domain name.
Allow the DHCP and BOOTP clients to update the NTP settings of the printer.
Specify a service name for the zero configuration network.
Assign an IP address automatically.
Specify the current Domain Name System (DNS) server address.
Specify the backup DNS server addresses.
Specify a list of domain names to locate the printer and its resources that reside
in different domains on the network.
Update the Dynamic DNS settings.
Specify the current DDNS settings.
167