Volvo Service Programme; Data Transfer Between Car And Workshop Via Wi-Fi - Volvo XC60 Owner's Manual

MAINTENANCE AND SERVICE

Volvo service programme

To keep the car as safe and reliable as possible,
follow the Volvo service programme as specified
in the Service and Warranty Booklet.
Volvo recommends engaging an authorised Volvo
workshop to perform the service and mainte-
nance work. Volvo workshops have the personnel,
special tools and service literature to guarantee
the highest quality of service.
IMPORTANT
For the Volvo warranty to apply, check and
follow the instructions in the Service and
Warranty Booklet.
Service and repair
Service the car regularly. Follow Volvo's recom-
mended service intervals.
If inspection and repair are required then only an
authorised Volvo workshop may carry out the
work.
WARNING
Do not carry out any repairs of your own on
this vehicle. Electrical cables and/or compo-
nents that have detached must only be recti-
fied by an authorised workshop - an author-
ised Volvo workshop is recommended.
618
Charging cable with control unit
IMPORTANT
Do not modify the control unit in any way.
Related information
Car status (p. 620)
•
Book service and repair (p. 621)
•
Connection of equipment to the car's diag-
•
nostic socket (p. 40)
Servicing the climate control system
•
(p. 627)
Brake system maintenance (p. 454)
•
Engine compartment overview (p. 628)
•
Data transfer between car and
workshop via Wi-Fi
Volvo's workshops have a specific Wi-Fi network
for secure data transfer between your car and
the workshop. Your workshop visit will be sim-
pler and more efficient when the transfer of diag-
nostic information and software can take place
via the workshop's network.
When you reach the workshop for your visit, your
service technician may want to connect your car
to the workshop's network via Wi-Fi to perform
fault-tracing and software download. For this type
of communication, the car only connects to a
workshop's network. It is not possible to connect
the car to another Wi-Fi network, such as at
home, in the same way as to a workshop's net-
work.
Connection with the remote control key
Connection is normally handled by the service
technician who then uses the remote control key
buttons. That's why it's important to take a key
with buttons with you for the workshop visit.
Press three times on the lock button on the
remote control key to connect the car to the
workshop's network via Wi-Fi.
When the car is connected to a Wi-Fi network,
the symbol appears in the centre display.