Volvo XC60 Owner's Manual page 294

DRIVER SUPPORT
Changing the tolerance for the
automatic speed limiter
The Automatic Speed Limiter function (ASL) can
be set for different tolerance levels.
It is possible to increase/decrease the signed
speed limit. If, for example, the car follows a
signed speed limit of 70km/h (43 mph) the
driver can instead choose to allow the car to
maintain 75 km/h (47 mph).
Buttons and symbols for functions
20 NOTE: The illustration is schematic - details may vary depending on car model.
Road Sign Information - RSI
21
292
Press the steering wheel button
–
until 70 km/h (43 mph) in the centre of the
speedometer (4) changes to 75 km/h
(47 mph).
> After which, the car uses the selected tol-
erance 5 km/h (4 mph) as long as signs
passed are showing 70 km/h (43 mph).
The tolerance is followed until a road sign
with a lower or higher speed is passed -
then the car follows the new signed
speed limit instead and the tolerance is
deleted from the memory.
If the Road Sign Information*
activated, the signed speed limit will also
be shown with a coloured indicator on the
speedometer.
The tolerance is adjusted in the same way as the
speed setting is in the speed limiter.
NOTE
The maximum selectable tolerance is
20 .
+/- 10 km/h (5 mph).
Related information
Speed Limiter (p. 285)
•
Automatic speed limiter (p. 289)
•
Activating/deactivating Road Sign Informa-
•
(1)
tion (p. 373)
21
function is
* Option/accessory.