Fitting And Removing The Safety Net - Volvo XC60 Owner's Manual

3.
Position the safety grille's brackets on the
roof mountings.
The next step is facilitated if two people hold
the safety grille in the right position.
4.
Insert the supplied screw and tighten using
the supplied 6 mm Allen key. Repeat on the
other side. Recommended tightening torque:
20 Nm (15 foot-pounds).
> Check that the safety grille is properly fit-
ted.
5. Restore the backrest to the upright position.
For more information about the tools required
and methods for fitting/removal, see the installa-
tion instructions that were included with the initial
purchase.
IMPORTANT
The protective grille cannot be folded up or
down when a cargo cover is fitted.
Related information
Recommendations for loading (p. 605)
•
Load retaining eyelets (p. 608)
•
LOADING, STORAGE AND PASSENGER COMPARTMENT

Fitting and removing the safety net*

The safety net prevents loads from being thrown
forward in the passenger compartment in the
event of sudden braking.
The safety net is fitted into four mounting points.
For reasons of safety, the safety net must always
be fastened and anchored as described below.
The net is made of a strong nylon fabric and can
be secured two different locations in the car:
Rear fitting - behind the rear seat.
•
Front fitting - behind the front seats.
•
WARNING
Loads in the luggage compartment must be
anchored well, and also using a correctly fit-
ted safety net.
}}
613
* Option/accessory.