Volvo XC60 Owner's Manual page 227

3. Press Add timer .
> A pop-up window is shown.
NOTE
It is not possible to add a time setting if there
already are 8 settings entered for the timer.
Delete a time setting in order to be able to
add a new one.
4. Tap on Date to set the time for a single date.
Tap on Days to set the time for one or more
days of the week.
Days
With : Activate/deactivate repetition by
ticking/unticking the box for
weekly .
5. With Date
: Select the date for precondition-
ing by scrolling the date list with the arrows.
With Days : Select the days of the week for
preconditioning by tapping on the buttons for
the days of the week.
6. Set the time when the preconditioning
should be finished by scrolling with the
arrows.
Applicable to fuel-driven auxiliary heater.
10
7. Tap on
ting.
> The time setting is added to the list and is
activated.
WARNING
Do not use preconditioning
In unventilated spaces indoors. Exhaust
•
gases are emitted if the heater starts.
In locations with combustible or flamma-
•
ble material nearby. Fuel, gas, long grass,
sawdust, etc. may ignite.
When there is a risk that the heater's
•
exhaust line may be blocked. For exam-
Repeat
ple, deep snow inside the front right-hand
wheel housing can obstruct the heater's
ventilation.
Remember that the preconditioning can be
started by a timer that has been set for a long
time in advance.
Editing a time setting
1. Open the climate view in the centre display.
2. Select the
3. Press the time setting that is to be changed.
> A pop-up window is shown.
4. Edit the time setting in the same way as
described in "Adding a time setting" above.
Confirm in order to add the time set-
10
:
Parking climate
tab.
Related information
Preconditioning (p. 221)
•
Preconditioning time setting (p. 224)
•
Activating and deactivating time setting for
•
preconditioning (p. 226)
Removing time setting for preconditioning
•
(p. 226)
CLIMATE
225