14.
If it is necessary to replace the display hinge cover, hinges, or both, rotate top of hinge cover away from
display enclosure to disengage the tabs (1), and then pull the cover off the enclosure (2).
The display hinge cover is available in the Hinge Kit as spare part number L13683-001.
15.
If it is necessary to replace the display hinges, remove the three Phillips M2.5 × 10.0 screws that secure
each hinge (1), and then remove the hinges from the display enclosure (2).
Display hinges are available in the Hinge Kit as spare part number L13683-001.
Component replacement procedures
71