Table of Contents
Advertisement
C-1
fIeLD INstaLLeD OPtIONs /
aCCessORIes
MeDIUM WeLDeR tRaILeR
For heavy-duty road, off-road, plant and yard use.
Includes pivoting jack stand, safety chains, and 13"
wheels. Stiff .120" welded rectangular steel tube
frame construction is phosphate etched and powder
coat painted for superior rust and corrosion resis-
tance. Low sway suspension gives outstand- ing sta-
bility with manageable tongue weight. Wheel bearings
are packed with high viscosity, high pressure, low
washout Lubriplate® grease. Includes a Duo-HitchTM
– a 2" Ball/Lunette Eye combination hitch. Overall
width 60".
Order:
K2636-1 trailer
K2639-1 fender & Light Kit
K2640-1 Cable Rack
fOUR-WHeeLeD steeRaBLe yaRD tRaILeR
For off-road, plant and yard use. Includes an automat-
ically engaging drawbar lock when the drawbar is
raised to the verticle position. 13" wheels. Wheel bear-
ings are packed with high viscosity, high pressure, low
washout Lubriplate® grease. Stiff 3/16" welded rec-
tangular steel frame con- struction is phosphate
etched and powder-coat painted for superior rust and
corrosion resistance. Also includes a Duo-HitchTM – a
2" Ball/ Lunette Eye combination hitch. Overall width:
55".
Order K2641-2
sPaRK aRRestOR KIt
Mounts to Muffler Exhust Tube. Virtually eliminates
spark emissions.
Order K903-1
POLaRIty/MULtI-PROCess sWItCH
For easy polarity switching. Example: DC- stick root
pass on pipe & DC+ stick for hot, full and cap passes.
Also for an easy process change. Example: DC+ stick
root pass on pipe & DC- Innershield® self- shielded
flux-cored wirre for hot, fill and cap passes. 6 & 14-pin
remote connections can be made to this unit. For all
Lincoln Chopper Technology® engine-driven welders.
Mounts on roof with K2663-1 Docking Kit.
Order K2642-1
aCCessORIes
DOCKING KIt
Secures the K2642-1 Polarity/Multi-Process Switch to
the engine-driven welder roof. Release latch permits
removal of K2642-1 Polarity/Multi-Process Switch.
Made from stainless steel for rust-free operation. For
all Lincoln Chopper Technology® engine-driven
welders.
Order K2663-1
stICK OPtIONs
aCCessORy KIt
Includes 35 ft. (10.7 m) 2/0 electrode cable with lug,
30 ft. (9.1 m) 2/0 work cable with lugs, headshield, fil-
ter plate, cover plate, work clamp and electrode hold-
er. 400 amp capacity.
Order K704
ReMOte OUtPUt CONtROL
Consists of a control box with choice of two cable
lengths. Permits remote adjustment of output.
Order:
K857 for 25 ft. (7.6 m)
K857-1 for 100 ft. (30.5 m)
tIG OPtIONs
PRO-tORCH® Pta-26V tIG tORCH
Air-cooled 200 amp torch (2 piece) equipped with
valve for gas flow control. 25 ft. (7.6 m) length.
Order K1783-9
MaGNUM® PaRts KIt fOR Pta-26V
tIG tORCH
Magnum® Parts Kit provides all the torch accessories
you need to start welding. Parts kit provides collets,
collet bodies, a back cap, alumina nozzles and tung-
stens in a variety of sizes, all packaged in an easy to
carry reclosable sack.
Order KP509
fOOt aMPtROL®
Provides 25 ft. (7.6 m) of remote output control for TIG
welding. (6-pin plug con- nection).
Order K870
VaNtaGe® 580
C-1
Advertisement
Table of Contents
