Table of Contents
Advertisement
C-2
HaND aMPtROL®
Provides 25 ft. (7.6 m) of remote current control for
TIG welding. (6-pin plug connection). Velcro straps
secure torch.
Order K963-3 (one size fits all Pro-Torch® TIG
Torches)
WIRe feeDeR OPtIONs
LN-25 PRO WIRe feeDeR
Portable CC/CV unit for flux-cored and MIG welding
with MAXTRAC® wire drive system. Includes gas
solenoid and inter- nal contactor
Order K2613-1
MaGNUM® 350 INNeRsHIeLD GUN (for LN-25
PRO)
For self-shielded wire with 15 ft. (4.5 m) cable. For
.062"-3/32" (1.6-2.4 mm) wire.
Order K126-2
DRIVe ROLL aND GUIDe tUBe KIt (for LN-25
PRO)
For cored or solid steel wire.
Order:
KP1697-068 for .068"-.072" (1.8 mm)
KP1697-5/64 for 5/64" (2.0 mm)
MaGNUM® 300 MIG GUN
For .035"-.045" (0.9-1.2 mm) gas- shielded wire with
15 ft. (4.5 m) cable.
LN-25 PRO
Order:K1802-1 (Includes Connector Kit)
DRIVe ROLL aND GUIDe tUBe KIt (for LN-25
PRO)
For .035" and .045" (0.9-1.1 mm) solid steel wire.
Order KP1696-1
MaGNUM® sG sPOOL GUN
Hand held semiautomatic wire feeder. Requires SG
Control Module and Input Cable.
Order K487-25
sG CONtROL MODULe
The interface between the power source and the
spool gun. Provides control of the wire speed and gas
flow. For use with a spool gun.
Order K488
aCCessORIes
INPUt CaBLe (for sG CONtROL MODULe)
For Lincoln engine power sources with 14-pin MS-
type connection, separate 115V NEMA receptacles
and output stud connections.
Order K691-10
VaNtaGe® 580
C-2
Advertisement
Table of Contents
