Adjusting Volume; Connecting To Wireless Networks; Connecting A Bluetooth Device - Kodak LUMA 400 User Manual

16. ADJUSTING VOLUME

To adjust the device volume during playback, use the

17. CONNECTING TO WIRELESS NETWORKS

1. From the home screen, select Settings.
2. From the Settings menu, select Wi-Fi.
3. Select the correct network from the list and use the arrows on top of the projector, your phone, or
the remote to navigate the keyboard and enter the password.
4. The projector should connect to that network whenever it is in range.
NOTE: It is necessary to connect to a wireless network if you want to take advantage of the Android
functionality on your projector.

18. CONNECTING A BLUETOOTH DEVICE

1. From the home screen, select Settings.
2. From the Settings menu, select Bluetooth.
3. Turn on the device you want to connect to your projector. Then, the device should appear
on the projector's Bluetooth list.
4. Select the device on the Bluetooth list you want connected.
5. Wait a few mintues for your projector to connect to your device.
10
+ and - buttons on the remote control.