Adjusting Focus; Adjusting Volume; Adjusting Picture Settings - Kodak FLIK X4 User Manual

6.3”h | 8.1”w | 2.9”d (15.9 cm | 20.5 cm | 7.5 cm)

Hide thumbs Also See for FLIK X4:

Table of Contents

16. ADJUSTING FOCUS

If the image on the screen appears fuzzy or unfocused when you turn the projector on, use the focus

wheel on the top to correct the image. Move the wheel left or right until the image appears sharp and

clear. The dial behind the focus wheel allows you to adjust the viewing angle of the screen.

NOTE: For best performance, the projector must be located a minimum distance of 3.5

feet (1 meter) from the screen. If a specific image or video remains fuzzy after adjusting

the focus wheel, try pressing the back button until you return to the Main Page. If the Main

Page graphics appear clear and the image is still fuzzy, the problem may be the image or

video quality.

To adjust the device volume during playback, use the < and > buttons on the top of the projector or the

volume buttons on the remote control.

From the Main Page, navigate to Settings and press the OK button to select. Once you are on the

Settings Page, select the top option, "Picture Mode" and use the arrows to navigate through the preset

options. The final option "User" allows you to personally customize the brightness and other

picture settings.

Table of Contents

Show Quick Links

Table of Contents