Daikin VAM350J8VEB Service Manual page 99

Zone control
VAM350~2000J8VEB + EKVDX32~100A2VEB
VRV system air conditioner
ESIE22-07 – 2022.02
Example
Setting the central control group number 2-05 to 1:
Use the local setting on the controller to set the central control group number.
Mode number: 00
Central control group number: 2-05
F1 F2
c
VAM 1
F1 F2
VAM 2
F1 F2
VAM 3
F1 F2
VRV
F1 F2
b
1
Zone 1
2
Zone 2
a Controller for air conditioner
b Maximum length of connection line: 1000 m
c Central controller (DCS302C51 or DCS601C51 or DCM601A51)
VAM 1 VAM heat reclaim ventilation unit 1
VAM 2 VAM heat reclaim ventilation unit 2
VAM 3 VAM heat reclaim ventilation unit 3
VRV VRV indoor unit
▪ Up to 64 units, a combination of air conditioners and VAM units, can be
connected to the F1 and F2 terminals.
▪ Zone 1 and 2 can be controlled independently with the central controller.
Zone 2
The VAM units operate in the zone-linked mode, as described in
with more than 2 groups" [
Initial settings:
▪ A central control group number must be assigned to each VAM unit and air
conditioner. See "The central control group number setting" in
4
control" [ 98] for information about setting the group number.
1
P1
P2
P1 P2 a
2
P1
P2
P1 P2
a
4
95].
draft – 07/02/2022 15:12
5 | Technical data
"Linked control
"All/individual
Service manual
99