2
|
General operation
Service manual
18
draft – 07/02/2022 15:12
compatible with VRV IV and VRV IV+, in this case a field setting is required at VAM
and EKVDX-A unit to indicate system is R410A. In this case BRC1H51/81 can be
used.
VAM CAN be installed standalone as well. In this case it should have a separate
remote controller. If centralized control is to be used, then F1/F2 In wiring will
include the standalone VAM. In this case VAM will NOT be registered as a unit via
VRV, but it will be visible through the central controller.
VAM350~2000J8VEB + EKVDX32~100A2VEB
VRV system air conditioner
ESIE22-07 – 2022.02