Table of Contents
Advertisement
Wireless Remote
Commander
Remove the insulation sheet before using
the Wireless Remote Commander.
Insulation
sheet
DATA CODE button (92)
TC RESET button (48)
SCAN/SLOW buttons (36)
/
(Previous/Next) buttons (36)
PLAY button
STOP button
DISPLAY button (23)
Transmitter
START/STOP button (31)
Power zoom buttons
PAUSE button
MODE button (31, 33)
You can change recording/playback mode.
/
/
/
/ENTER buttons
Notes
Aim the Wireless Remote Commander towards
the remote sensor to operate your camcorder.
Point the remote sensor away from strong light
sources such as direct sunlight or overhead
lighting. Otherwise, the Wireless Remote
Commander may not function properly.
When you are operating with the Wireless
Remote Commander supplied with your
camcorder, your video device may also operate.
In that case, select a commander mode other
than DVD2 for your video device, or cover the
sensor of your video device with black paper.
To change the battery of the Wireless
Remote Commander
While pressing on the tab, inset your fingernail
into the slit to pull out the battery case.
Place a new battery with the + side facing up.
Insert the battery case back into the Wireless
Remote Commander until it clicks.
Tab
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in fire.
When the lithium battery becomes weak, the
operating distance of the Wireless Remote
Commander may shorten, or the Wireless
Remote Commander may not function
properly. In this case, replace the battery with
a Sony CR2025 lithium battery. Use of another
battery may present a risk of fire or explosion.
GB
1
Advertisement
Table of Contents
