Samsung WD8 T Series User Manual page 23

Connecting to a non-threaded water tap
C
U-PJT_COMBO-MD_SimpleUX_WEB_SSEC-02__EU_English.indd 23
1. Remove the adaptor (A) from the water hose (B).
A
B
2. Use a Phillips screwdriver to loosen four screws on
the adaptor.
3. Hold the adaptor and turn part (C) in the arrow
direction to loosen it by 5 mm (*).
4. Insert the adaptor onto the water tap, and then
tighten the screws while lifting the adaptor.
5. Turn part (C) in the arrow direction to tighten it.
C
English 23
2022/4/19 19:45:33