Remove The Base Assembly For Vesa Mounting - Philips E Line 288E2 User Manual

2. Setting up the monitor
Resolution notification
This monitor is designed for optimal
performance at its native resolution,
3840 × 2160. When the monitor is
powered on at a different resolution, an
alert is displayed on screen: Use 3840 ×
2160 for best results.
Display of the native resolution alert can
be switched off from Setup in the OSD
(On Screen Display) menu.
Physical Function
Tilt
20
Height adjustment (288E2E/288E2UAE)
-5
100mm
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
Display base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the monitor face down on a
smooth surface. Pay attention not
to scratch or damage the screen.
2. While keeping the release button
pressed, tilt the stand and slide it
out.
10