DC power cord for normal operation. • Please use approved power cord provided by Philips all the time. If 1.1 Safety precautions and your power cord is missing, please maintenance contact with your local service center.
Page 4
1. Important bezel, ensure that the monitor does the monitor by placing your hand or not tilt downward by more than -5 fingers on the LCD panel. degrees. If the -5 degree downward • Oil-based cleaning solutions may tilt angle maximum is exceeded, the damage the plastic parts and void monitor damage will not be covered the warranty.
1. Important • Always activate a moving screen you are not sure what procedure to take saver program when you leave when the operating instructions given in your monitor unattended. Always this manual have been followed. activate a periodic screen refresh application if your monitor will 1.2 Notational Descriptions display unchanging static content.
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, This marking on the product or on end-of-life management primarily its packaging illustrates that, under...
Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
Page 8
2. Setting up the monitor Install base stand Connecting to your PC 1. In order to well protect this monitor 288E2A and avoid scratching or damaging of the monitor, keep the monitor face down in the cushion for the base installation.
Page 9
The display must be powered ON at all Audio output times to be able to use this function. USB upstream Some select Philips displays may not USB fast charger/USB downstream Power or Charge your device when it USB downstream enters to “Sleep/Standby” mode (White power LED blinking).
2. Setting up the monitor 2.2 Operating the monitor Description of the control buttons Note If you Turn OFF your monitor via the Press to switch power on. power switch at any given time, all the Press more than 3 seconds USB ports will power OFF.
Page 11
Size: 1, 2, 3, 4, 5, 6, 7 Brightness: 0~100 On-Screen Display (OSD) is a feature in Contrast: 0~100 H. position all Philips LCD monitors. It allows an end V. position user to adjust screen performance or Low Blue 1,2,3,4...
2. Setting up the monitor Resolution notification Warning This monitor is designed for optimal • To avoid potential screen damage, performance at its native resolution, such as panel peeling, ensure that 3840 × 2160. When the monitor is the monitor does not tilt downward powered on at a different resolution, an by more than -5 degrees.
Why do I need it? the back-plug-in signal cable and the wall would be too short. With the ultra high resolution Philips MultiView display, you can experience a world of connectivity in a comfortable way in the office or at home. With this display, you can conveniently enjoy multiple content sources at one screen.
Page 14
2. Setting up the monitor 1. Toggle to the right to enter OSD When the sub source is Menu Screen. not detected. 2. Toggle to the up or down to select (main) main menu [PIP / PBP], then toggle to the right to confirm. 3.
Page 15
2. Setting up the monitor • PIP Size: When PIP is activated, • Off: Stop MultiView function. there are three sub-window sizes to choose: [Small], [Middle], [Large]. (main) Small Middle Large (main) Note When you do the SWAP function, the • PIP Position: When PIP is activated, video and its audio source will swap at there are four sub-window positions...
Whether you're working 2. Toggle to the up or down to select with text applications, displaying images between FPS, Racing, RTS, Gamer 1, or watching a video, Philips SmartImage Gamer 2, LowBlue Mode, EasyRead, delivers great optimized monitor SmartUniformity and Off.
Developed for wellbeing, By reducing your monitor's power Philips LowBlue Mode setting uses a consumption, you save on energy costs smart software technology to reduce and extend the lifetime of your monitor.
5. Technical Specifications 5. Technical Specifications Picture/Display Display Panel Type IPS technology Backlight W-LED system Panel Size 28” W (71.1 cm) Aspect Ratio 16:9 Pixel Pitch 0.16 (H) mm x 0.16 (V) mm Contrast Ratio (typ.) 1000:1 Optimum Resolution 3840 x 2160 @ 60 Hz Viewing Angle 178°...
Page 20
5. Technical Specifications Stand Tilt -5 / +20 degree Height adjustment 100 mm (288E2E/288E2UAE) Power (288E2A) AC Input Voltage AC Input Voltage AC Input Voltage Consumption at 100VAC , 60Hz at 115VAC , 60Hz at 230VAC , 50Hz Normal Operation 37.4 W (typ.) 37.4 W (typ.) 37.5 W (typ.)
Page 21
5. Technical Specifications Normal Operation 29.5 W (typ.) 29.3 W (typ.) 29.2 W (typ.) Sleep (Standby 0.5 W 0.5 W 0.5 W mode) Off mode 0.3 W 0.3 W 0.3 W AC Input Voltage AC Input Voltage AC Input Voltage Heat Dissipation* at 100VAC , 60Hz at 115VAC , 60Hz...
Page 22
100% PVC BFR free housing Cabinet Color Black Finish Textured Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. SmartUniformity and Delta E information sheets are included in the box.
2160, but it always depends on your capability of graphics card and BluRay/video players. • For best output performance, please always ensure that your graphic card is capable of achieving the maximum resolution and refresh rate of this Philips display.
6. Power Management Note 6. Power Management This data is subject to change without notice. If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7.1 Philips’ Flat Panel Monitors single black pixel. Other combinations Pixel Defect Policy of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the Types of Pixel Defects...
Page 26
Note the warranty period, a TFT Monitor A red or blue bright dot must be panel in a Philips flat panel monitor more than 50 percent brighter than must have pixel or sub pixel defects neighboring dots while a green...
Page 27
7. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 3 or fewer 2 adjacent lit subpixels 1 or fewer 3 adjacent lit subpixels (one white pixel) 0 or fewer Distance between two bright dot defects* >15mm Total bright dot defects of all types 3 or fewer BLACK DOT DEFECTS...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
• Disconnect the monitor from mains This page deals with problems that can power source immediately for safety be corrected by a user. If the problem • Contact with Philips customer still persists after you have tried these service representative immediately. solutions, contact Philips customer service representative.
• Shut down your computer, Service contact information listed in disconnect your old monitor and Important information manual and reconnect your Philips LCD monitor. contact Philips customer service • Turn on your monitor and then turn representative. on your PC.
Page 31
9300K are blue. Neutral temperature is white, at 6504K. Q8: Can I connect my LCD monitor to any PC, workstation or Mac? Ans.: Yes. All Philips LCD monitors are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter to connect the monitor to your Mac system.
Page 32
8. Troubleshooting & FAQs Q9: Are Philips LCD monitors Plug- Q12: How to unlock/lock my hot key? and- Play? Ans.: Please press for 10 seconds Ans.: Yes, the monitors are Plug-and- to unlock/lock the hot key, by Play compatible with Windows doing so, your monitor pops out 10/8.1/8/7, Mac OSX.
Page 33
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.