Related Manuals for Philips 288P6
Summary of Contents for Philips 288P6
- Page 1 288P6 www.philips.com/welcome EN User manual Customer care and warranty Troubleshooting & FAQs...
-
Page 2: Table Of Contents
4.1 Resolution & Preset Modes ....19 5. Power Management ......20 6. Regulatory Information .....21 7. Customer care and warranty ..28 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy ..........28 7.2 Customer Care & Warranty ....30 8. Troubleshooting & FAQs ....34 8.1 Troubleshooting ..........34... -
Page 3: Important
1. Important • Please use approved power cord provided 1. Important by Philips at all times. If your power cord is missing, please contact your local service This electronic user’s guide is intended for center. (Please refer to Customer Care anyone who uses the Philips monitor. -
Page 4: Notational Descriptions
1. Important • Temperature: 0-40°C 32-104°F 1.2 Notational Descriptions • Humidity: 20-80% RH The following subsections describe notational Important information for Burn-in/Ghost conventions used in this document. image Notes, Cautions and Warnings • Always activate a moving screen saver Throughout this guide, blocks of text may be program when you leave your monitor accompanied by an icon and printed in bold or unattended. -
Page 5: Disposal Of Product And Packing
Taking back/Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of... -
Page 6: Setting Up The Monitor
2. Rotate the neck counterclockwise 90 使用 前请阅读使用说明 degree. User’s Manual 保留备用 Monitor drivers Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Audio *USB *MHL Power... - Page 7 2. Setting up the monitor Connect to PC Connecting to your PC 1. Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 3. Connect the monitor signal cable to the video connector on the back of your computer.
-
Page 8: Operating The Monitor
2. Setting up the monitor Customize your own “USER” key 2.2 Operating the monitor This hot key allows you to setup your favorite Description of the control buttons function key. 1. Press button on the front bezel to enter OSD Menu Screen. Horizontal Audio Source Color... - Page 9 Audio Source What is On-Screen Display (OSD)? Audio In MHL-HDMI On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to DisplayPort adjust screen performance or select functions Independent audio playback, regardless of of the monitors directly through an on-screen video input instruction window.
-
Page 10: The Osd Menu
2. Setting up the monitor The OSD Menu Resolution notification Below is an overall view of the structure of This monitor is designed for optimal the On-Screen Display. You can use this as a performance at its native resolution, reference when you want to work your way 3840 ×... -
Page 11: Multiview
PC and Notebook side-by-side simultaneously, Pivot making complex multi-tasking work a breeze. Why do I need it? With the ultra high resolution Philips MultiView display, you can experience a world of connectivity in a comfortable way in the office or at home. With this display, you can conveniently enjoy multiple content sources at one screen. - Page 12 2. Setting up the monitor How to enable MultiView by hotkey? • Press ▲ or ▼ button to select main menu [PIP / PBP], then press button. 1. Press the hotkey directly on the front bezel. • Press ▲ or ▼ button to select [PIP / PBP Mode], then press button. • Press ▲ or ▼ button to select [PIP] or [PBP]. • Now you can move backward to set the [PIP / PBP Input], [PIP Size], [PIP Position]., or [Swap].
- Page 13 2. Setting up the monitor • PIP / PBP Input: There are four different • Swap: The main picture source and the video input to choose as the sub sub picture source swapped on the display source: [DVI], [MHL-HDMI], and display.
-
Page 14: Remove The Base Assembly For Vesa Mounting
2. Setting up the monitor Note 2.4 Remove the Base Assembly for This monitor accepts a 100mm x 100mm VESA Mounting VESA-Compliant mounting interface. Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 100mm 1. -
Page 15: Mhl (Mobile High-Definition Link) Introduction
An optional MHL cable allows you to simply connect your MHL capable mobile device to this large Philips MHL display, and watch your HD videos come to life with full digital sound. Note Now not only you can enjoy your mobile • The port marked [MHL-HDMI] is the... -
Page 16: Image Optimization
ff How does it work? • Office: Enhances text and dampens SmartImage is an exclusive, leading edge Philips brightness to increase readability and technology that analyzes the content displayed reduce eye strain. This mode significantly on your screen. Based on a scenario you select,... -
Page 17: Smartcontrast
LCD Why do I need it? monitors. Typical uniformity is measured You want the very best visual clarity and around 75-80%. By enabling Philips viewing comfort for every type of content. SmartUniformity feature, display uniformity SmartContrast dynamically controls contrast is increased to above 95%. -
Page 18: Technical Specifications
4. Technical Specifications 4. Technical Specifications Picture/Display Monitor Panel Type TFT-LCD Backlight W-LED system Panel Size 28" W (71.1cm) Aspect Ratio 16:9 Pixel Pitch 0.16 (H) x 0.16 (V) mm SmartContrast 50,000,000:1 Response Time SmartResponse 1ms (GtG) Optimum Resolution 3840 x 2160 @ 60Hz Viewing Angle 170° (H) / 160° (V) @ C/R > 10 Picture Enhancement SmartImage Display Colors... - Page 19 4. Technical Specifications <0.5 W (typ.) Off (AC switch) On Mode(ECO mode) 30 W (typ.) Power(EnergyStar test method) AC Input Voltage AC Input Voltage AC Input Voltage Energy Consumption at 100VAC , 50Hz at 115VAC , 60Hz at 230VAC, 50Hz Normal Operation 48.97 W (typ.) 48.65 W (typ.) 49.1 W (typ.) Sleep (Standby) <0.5 W (typ.) <0.5 W (typ.) <0.5 W (typ.) <0.4 W (typ.) <0.4 W (typ.)
- Page 20 Finish Texture Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
-
Page 21: Resolution & Preset Modes
4. Technical Specifications VGA/DVI-D: 1920x1080@60Hz 4.1 Resolution & Preset Modes DVI-D dual-link: 3840x2160 @ 30Hz Maximum Resolution DisplayPort: 3840x2160 @ 60Hz 1920 x 1080 @ 60 Hz (analog input) MHL:1920x1080@60Hz 3840 x 2160 @ 60 Hz (digital input) HDMI 2.0: 3840x2160@60Hz Recommended Resolution 2. The factory default setting DisplayPort v1.1 3840 x 2160 @ 60 Hz (digital input) supports to the resolution 3840x2160 @ 30 Hz. For optimized resolution 3840x2160 @ 60Hz, H. -
Page 22: Power Management
5. Power Management 5. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 23: Regulatory Information
• The brand owner demonstrates corporate electronic equipment have been adhered to social responsibility and has a certified in order to make Philips monitors safe to use environmental management system (EMAS throughout its life cycle. or ISO 14001) TCO Certified Edge • Very low energy consumption both in... - Page 24 6. Regulatory Infomation EPEAT • EN61000-3-3:2008 (Limitation of Voltage Fluctuation and Flicker) following provisions (www.epeat.net) of directives applicable. The EPEAT (Electronic • EN50581:2012 (Technical documentation Product Environmental for the assessment of electrical and Assessment Tool) program electronic of hazardous substances) evaluates computer • 2006/95/EC (Low Voltage Directive). desktops, laptops, and monitors based on 51 • 2004/108/EC (EMC Directive).
- Page 25 6. Regulatory Infomation Energy Star Declaration Changes or modifications not expressly approved by the party responsible for (www.energystar.gov) compliance could void the user's authority ® As an ENERGY STAR Partner, we to operate the equipment. have determined that this product Use only RF shielded cable that was supplied ®...
- Page 26 6. Regulatory Infomation EN 55022 Compliance (Czech Republic Only) nuisibles aux communications radio. Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce qui peut être décelé...
- Page 27 6. Regulatory Infomation North Europe (Nordic Countries) Information 2. nur original-Ersatzteile verwendet werden. 3. bei Ersatz der Bildröhre nur eine Placering/Ventilation bauartgleiche eingebaut wird. VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE Aus ergonomischen Gründen wird empfohlen, OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR die Gr undfarben Blau und Rot nicht auf DU STÄLLER DIN UTRUSTNING PÅPLATS.
- Page 28 6. Regulatory Infomation Information for U.K. only How to connect a plug The wires in the mains lead are coloured in accordance with the following code: WARNING - THIS APPLIANCE MUST BE EARTHED. BLUE -“NEUTRAL”(“N”) BROWN -“LIVE”(“L”) Important: GREEN&YELLOW -“EARTH”(“E”) This apparatus is supplied with an approved moulded 13A plug.
- Page 29 6. Regulatory Infomation China RoHS The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products produced and sold for China market have to meet China RoHS request. 《废弃电器电子产品回收处理管理条例》...
-
Page 30: Customer Care And Warranty
No manufacturer can guarantee the types of bright dot defects. that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type. - Page 31 Because pixel and sub pixels defects of the percent brighter than neighboring dots while same type that are near to one another may be a green bright dot is 30 percent brighter than more noticeable, Philips also specifies tolerances neighboring dots. for the proximity of pixel defects. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'.
-
Page 32: Customer Care & Warranty
7.2 Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region:... - Page 33 7. Customer care and warranty +36 1 814 8080(General) Hungary Profi Service +36 1814 8565(For AOC&Philips only) Kazakhstan Classic Service I.I.c. +7 727 3097515 +371 67460399 Latvia ServiceNet LV +371 27260399 +370 37 400160(general) Lithuania UAB Servicenet +370 7400088 (for Philips) Macedonia +389 2 3125097 Moldova Comel +37322224035 Romania Skin +40 21 2101969...
- Page 34 Mon.~Fri. 9:00am-6:00pm Macau Technology Ltd. Macau: Sat. 9:00am-1:00pm Tel: (853)-0800-987 REDINGTON INDIA Tel: 1 800 425 6396 India Mon.~Fri. 9:00am-5:30pm SMS: PHILIPS to 56677 +62-21-4080-9086 PT. CORMIC Mon.~Thu. 08:30-12:00; 13:00- (Customer Hotline) Indonesia SERVISINDO 17:30 +62-8888-01-9086 PERKASA Fri. 08:30-11:30; 13:00-17:30"...
- Page 35 7. Customer care and warranty Philips Singapore Pte Mon.~Fri. 9:00am-6:00pm Singapore Ltd (Philips Consumer (65) 6882 3966 Sat. 9:00am-1:00pm Care Center) Taiwan FETEC.CO 0800-231-099 Mon.~Fri. 09:00 - 18:00 Axis Computer System Thailand (662) 934-5498 Mon.~Fri. 08:30am~05:30pm Co., Ltd. Computer Repair South Africa 011 262 3586 Mon.~ Fri.
-
Page 36: Troubleshooting & Faqs
Philips customer service representative. • Disconnect the monitor from mains power source immediately for safety Common Problems • Contact with Philips customer service No Picture (Power LED not lit) representative immediately. • Make sure the power cord is plugged into... -
Page 37: General Faqs
LED Setup in OSD main Controls. Image appears blurred, indistinct or too dark For further assistance, refer to the Consumer • Adjust the contrast and brightness on Information Centers list and contact Philips On-Screen Display. customer service representative. An "after-image", "burn-in" or "ghost image"... - Page 38 Can I connect my LCD monitor to any the monitor, make sure that there is PC, workstation or Mac? no pressure or force applied to the Yes. All Philips LCD monitors are fully Ans.: panel surface side. This may affect your compatible with standard PCs, Macs warranty conditions.
- Page 39 8. Troubleshooting & FAQs Q11: What is Image Sticking, or Image Burn- Attention in, or After Image, or Ghost Image in LCD panels? Monitor control unlocked Ans.: Uninterrupted display of still or static images over an extended period may cause "burn in", also known as "after-imaging"...
-
Page 40: Multiview Faqs
8. Troubleshooting & FAQs 8.3 Multiview FAQs Can I enlarge the PIP sub window ? Ans.: Yes, there are 3 sizes to select: [Small], [Middle], [Large]. You can press enter OSD menu. Select your preferred [PIP Size] option from the [PIP / PBP] main menu. - Page 41 © 2014 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice. Version: M6288PE2T...