Headlight Beam Adjustment - Yamaha WOLVERINE 2015 Owner's Manual

1
1. Do not touch the glass part of the bulb.
7. Connect the headlight coupler.
8. Install the bulb cover and the cover at the
rear of the headlight. NOTICE: Make
8
sure the headlight bulb cover is se-
curely fitted over the bulb holder and
seated properly.
9. Adjust the headlight beam if necessary.
[ECB02210]
EBU32681

Headlight beam adjustment

ECB00691
NOTICE
It is advisable to have a Yamaha dealer
make this adjustment.
To raise the beam, turn the headlight beam
adjusting screw in direction (a).
To lower the beam, turn the headlight beam
adjusting screw in direction (b).
(a)
1. Headlight beam adjusting screw
8-59
(b)
1