1. Differential gear oil filler bolt
2. Gasket
3. Differential gear oil
4. Correct oil level
3. If the level is low, add sufficient oil of the
8
recommended type to raise it to the
specified level. NOTICE: Be sure no for-
eign material enters the differential
gear case.
[ECB00412]
4. Check the gasket for damage, and re-
place it if necessary.
5. Install the differential gear oil filler bolt
and its gasket, and then tighten the bolt
to the specified torque.
Tightening torque:
2
1
3
Changing the differential gear oil
4
1. Park the vehicle on a level surface.
2. Remove the front bottom panel by re-
1
1. Front bottom panel
2. Bolt
3. Place an oil pan under the differential
8-23
Differential gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
moving the bolts.
2
2
gear case to collect the used oil.