Chapter 2
Installing the Cisco ONS 15540
Installing Strain Relief Brackets
Step 1
Step 2
78-15095-01
The Cisco ONS 15540 system uses a power supply cable strain relief bracket for
connections to its power supply and an alarm cable strain relief bracket for alarm
cable connections. The strain relief brackets must be installed after the shelf is
rack mounted and installed in the rack. The brackets are required for proper
function of the power supply and alarm cables.
To install the strain relief brackets, follow these steps:
Place the strain relief bracket over the designated slots on the back panel. (See
Figure
2-5.)
Use the two screws provided to secure the strain relief bracket to the shelf.
Cisco ONS 15540 ESP Hardware Installation Guide
Installing Strain Relief Brackets
2-11