Speakers; Removing The Speakers; Installing The Speakers - Dell OptiPlex All-in-One Plus 7410 Owner's Manual

Speakers

Removing the speakers

Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the back cover.
4. Remove the system-board
5. Remove the I/O cover.
6. Remove the bottom cover.
About this task
The following image(s) indicate the location of the speakers and provides a visual representation of the removal procedure.
Steps
1. Disconnect the speaker cable (INT SPKR) from the audio board.
2. Remove the speaker cable from its routing guides on the display-assembly base.
3. Lift the speakers and its cable off the display-assembly base.

Installing the speakers

Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the speakers and provides a visual representation of the installation procedure.
84 Removing and installing Field Replaceable Units (FRUs)
Before working inside your
shield.
computer.