Table of Contents
Advertisement
Steps
1. Connect the media-card reader cable to the system board and close the latch to secure the cable.
2. Insert the media-card reader into the media-card reader slot.
3. Align the screws on the media-card reader with the screw holes on the slot on the display assembly base.
4. Replace the screw (M2x3) that secure the media-card reader to the display-assembly base.
Next steps
1. Install the
system-board
2. Install the stand.
3. Install the
bottom
cover.
4. Install the
back
cover.
5. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
2. Remove the
back
cover.
3. Remove the
bottom
cover.
4. Remove the stand.
5. Remove the
system-board
About this task
The following image indicates the location of the speakers and provides a visual representation of the removal procedure.
shield.
After working inside your
Before working inside your
shield.
computer.
computer.
Removing and installing components
33
Advertisement
Table of Contents
