Table of Contents
Advertisement
Cooking with the timer
1
11
10
9
8
7
1
On when the timer is set
2
On when oven warming up
3
3 bars displayed when oven reaches
set temperature
4
On when oven cooling down
5
Oven door locked
6
Touch to toggle through cooking time & oven
set temp
7
Touch to toggle through the timer modes
8
Touch to start timer mode.
Hold to turn oven light on/off
9
End time icon
10
Cook time icon
11
Time of day icon
Adjusting the clock
To change the time, touch and hold the
the clock symbol begins to flash. The hour display will be
ready to change.
Toggle the temp selector
have the right hour.
The minutes will flash and can be set in the same manner.
5 seconds after the last change, the clock display will stop
flashing, confirming that the time has been set.
NOTE: The clock has a 24 hour display.
Setting the cook time
1.
Use the knobs to select the desired oven function and
cooking temperature.
2.
Touch the
button as often as necessary, until the
'cook time'
symbol appears.
3.
Set the desired cooking time commencing with
minutes by using
or
flashing, then touch the
hours by using
or
time adjustment the
appliance is now programmed and the display will
2
3
4
2 5
6
button until
or
, then touch
when you
, whilst the
symbol is
button again and set the
. After 5 seconds from the last
symbol will stop flashing. The
countdown to zero.
4.
When the set time has elapsed, a signal will sound
and the appliance will turn off. To stop the signal,
touch any button on the clock and then turn the oven
function selector to OFF.
NOTE: Cooking time cannot be set for the Rapid
Heat function.
The feature can be cancelled at any time by returning the
function selector to OFF.
ADDITIONAL FUNCTIONALITY
Setting the countdown timer
Use this for timing any activity. For example boiling eggs.
1.
Touch the
button, the display will flash.
2.
Set the countdown time you want by using
. Commence with setting the number of seconds
first. The minutes and hours can then be set by
subsequently pressing the
adjusting using
or
change the timer will stop flashing, confirming the
timer has been set.
3.
To cancel the timer touch the
will flash. Then touch and hold
until the timer is cleared.
4.
To stop the beeper, touch any button.
NOTE: The clock display cannot be selected when the
timer is operating.
Elapsed Time
When an oven function is selected (other than pyrolytic
clean) an elapsed timer commences on the display.
To reset this timer touch and hold both the
buttons until the timer is reset.
Displaying the oven temperature
During operation of the oven the current oven
temperature during pre-heating of the oven can be
displayed by touching the
operation the set temperature can be reviewed by
touching the
button.
NOTE: this temperature will only be displayed for
approximately 5 seconds.
Light operation
During operation of the oven the light can be switched
off by touching and holding the
light turns off. Also the light can be turned on from the
standby state by touching and holding the
until the light comes on.
and
button again and
. 5 seconds after the last
button, the display
and
buttons
and
button. During normal
button until the
button
USING YOUR OVEN
23
Hide quick links:
Advertisement
Table of Contents
