Before First Use - Westinghouse WVE612 User Manual

BEFORE FIRST USE

Preparing your appliance for the first time
• Please remove all internal boxes and bags from the
oven before operation.
• Please wipe out the oven interior prior to operation
with warm soapy water and polish dry with a soft
clean cloth. Do not close the oven door until the oven
is completely dry.
• If your appliance is fitted with a mechanical "Auto
Off" timer, make sure it is set to "Off" marker for
manual operation.
WARNING
CAUTION
• Do not line the oven with foil as it will damage the
enamel.
• New appliances can have an odour during first use. It
is recommended to 'run in' the oven before cooking
for the first time. Operate the oven(s), empty, at a
temperature of 180°C for approximately 30 minutes.
For appliances with a separate grill, run the grill on
maximum for 15 minutes WITH GRILL DOOR OPEN.
Please ensure that the room is well ventilated during
this process.
Setting the time of day
If you have purchased a model fitted with an electronic
clock or programmable controller, you must set the time
of day before you can operate your appliance.
Electronic clock
• After the appliance has been electrically connected,
"12.00" will be displayed and the "Clock" indicator
symbol will flash.
• To set the time of day, press the
• After 5 seconds from the last change, the "Clock"
indicator symbol
time has been set.
NOTE: The clock has a 24 hour display.
14
BEFORE FIRST USE
or symbols.
will disappear, confirming the
WVEP615, WVEP627, WVEP617 controller
Before the appliance can be used, the time must be set.
When power is supplied to the oven, the clock icon will be
displayed. Along with the
flashing. This indicated that the "hour" portion of the time
is ready to be changed.
Toggle the temperature selector
when you have the right hour.
The minutes will flash and can be set in the same manner.
5 seconds after the last change, the clock display will stop
flashing, confirming that the time has been set.
NOTE: The clock has a 24 hour display.
WVEP618 programmable controller
• After the appliance has been electrically connected,
press to turn ON
• To set the time, press
and press OK
• Then, "Set time of day" is highlighted and press
• Press or to set the hour and press
• Press or to set the minutes and press
• Press to return to function menu
clock symbol the "12" will be
or , then touch
until "Settings" is highlighted