Vizio V435M-K04 User Manual page 17

Adjusting the Color Tuner Settings
The Color Tuner settings allow you to adjust the color management system, 20
point white balance, turn color channels off for testing, and display SMPTE, flat,
ramp, and uniformity analyzer test patterns .
To access the color tuner table:
Menu > Picture > Advanced Picture > Color Calibration
Tuner
WARNING: The Color Tuner, White Balance, and test patterns
allow technicians to manually calibrate the TV. Calibration requires
specialized training, an input with precisely set colors, and a
specialized light meter.
To turn color channels off and on:
1. Use the Navigation buttons on the remote to highlight Red, Green, or Blue.
2. Press the OK button to turn the color channel off or on. An X appears over a
color channel that has been turned off.
3. Only two color channels can be turned off at the same time.
TIP: Any changes made affect the color temperature setting.
Select the preferred color temperature setting first. See Adjusting
the Color Temperature on page 15 .
To adjust the color management system settings:
Use the Navigation buttons on the remote to highlight the Hue, Saturation,
1.
Brightness, Offset, or Gain of the color you wish to adjust. Press the OK button.
Use the Left/Right Navigation buttons to adjust the value. When you are
2.
finished press the OK button to save the setting.
> Color
Color Tuner
Red Green
Hue 0 0
Saturation -1 5
Brightness -24 0
To adjust the White Balance Tuner settings:
Menu > Picture > Advanced Picture
Balance Tuner
1. Use the Navigation buttons on the remote to highlight the Gain and Color values
you wish to adjust. Press the OK button and use the Left/Right Navigation
buttons to adjust the value. When you are finished, press the OK button to save
the setting.
White Balance Tuner
Red
IRE% 5 0
Offset 0
Gain 0
To reset the 20 point white balance, offset, and gain to the defaults:
Menu > Picture > Advanced Picture
Color Temperature
To show or hide the SMPTE Test Pattern:
Menu
Calibration Test
Blue Cyan Magenta Yellow
0 0 25 -14
-4 0 -2 0
Use the Navigation buttons on the remote to highlight Off. Use the Left/Right
1.
-22 0 0 0
Navigation buttons to select On to show the SMPTE Pattern.
2. To hide the SMPTE Test Pattern, use the Left/Right Navigation buttons to
select Off.
> Color Calibration > White
Green Blue
0 0
0 0
0 0
> Color Calibration > Reset
> Picture > Advanced Picture > Color Calibration
> SMPTE Test Pattern
SMPTE Test Pattern
Off
—or—
>
17