Polaris RANGER XP 1000 2021 Owner's Manual page 132

MAINTENANCE
3. Rotate the clutch cover back and lift up and over the control arm mounting
w
.
Use care when lifting clutch cover upwards. Do not damage cover, intake boot,
4. Pull clutch cover out towards the rear of the vehicle as shown above.
5. Mark the drive belt direction of rotation so that it can be installed in the same
direction.
6. Insert clutch spreader tool
and turn clockwise to spread clutch.
Clutch spreader tool part number
2875911 is found in vehicle tool kit.
7. Walk the belt out of the driven clutch and drive clutch. Remove the belt from
the vehicle.
130
or electrical harness.
e
into threaded hole on driven clutch as shown
NOTICE
NOTICE