Polaris RANGER XP 1000 2021 Owner's Manual page 124

MAINTENANCE
DEMAND DRIVE (FRONT GEARCASE)
DEMAND DRIVE OIL CHECK
Always check and change the demand drive fluid at the intervals outlined in the
Periodic Maintenance Chart. Maintain the oil level even with the bottom thread
of the fill plug hole. Refer to the Gearcase Specifications Chart for
recommended lubricants, capacities and torque specifications.
The front gearcase fill plug
1. Position the vehicle on a level
surface.
2. Remove the fill plug
oil level.
3. Add the recommended oil as
needed.
4. Reinstall the fill plug. Torque to
specification.
DEMAND DRIVE OIL CHANGE
1. Support the vehicle securely with a jackstand.
2. Remove the front tire on the passenger's side for ease of access (optional).
3. Remove the fill plug.
4. Place a drain pan under the drain plug
5. Remove the drain plug. Drain the oil.
6. Clean and reinstall the drain plug. Torque to specification.
7. Add the recommended fluid to the bottom of the fill plug hole. Do not overfill.
8. Reinstall the fill plug. Torque to specification.
9. Check for leaks.
10. Discard used oil properly.
122
q
is located on the right side of the front gearcase.
q
. Check the
w
on the bottom right-hand side.