Release History - Emerson PNC001-A Series Important Product Information

GFK-2573AB

Release History

Version
IC695PNC001-BEBD
IC695PNC001-BEBD
IC695PNC001CA-
BEBD
IC695PNC001LT-
BEBD
IC695PNC001-BDBD
IC695PNC001-BCBD
IC695PNC001-
BCBD
22
IC695PNC001-BBBC
IC695PNC001-BBBB
IC695PNC001-BABB
IC695PNC001-BABA
IC695PNC001-AN
IC695PNC001-AM
IC695PNC001-AL
Firmwar Date
e
Revision
Support for IC695CMM002 and IC695CMM004 MODBUS
July
master and slave serial communications to the RX3i
3.20
PROFINET scanners IC695PNS001-Bxxx, IC695PNS101, and
2022
IC695CEP001
The product's labels have been updated to show compliance
with new certifications.
Nov
3.16
For updated certifications, please refer to https://emerson-
2021
mas.force.com/communities/en_US/Article/Certifications-
and-Agency-Approvals-Landing-Page.
Sep
3.16
Manufacturing update. No change to fit, form, or function.
2020
Aug
Resolved a Loss of Device in an MRP Ring after the
3.16
2020 PNC001-Bxxx is reset.
Rebranded the PNC001 to Emerson, applied patches for
Oct
3.15
VxWorks URGENT/11 vulnerabilities, and made additional
2019
updates to enhance cyber security.
Resolves an issue sending COMMREQs to the IC695GCG001
May
Genius Communication Gateway if its PROFINET Device ID is
3.11
2019
128 or greater.
Hardware change: slight housing dimension change to
Nov
address the issue of difficulty installing a module into a slot
3.10
with another module already installed in the left adjacent
2018
slot.
Corrects these issues: PROFINET IO Not Scanned After Loss of
Both Critical Ring Ports, Addition of IO Module Causes IO
Oct
Device to Disconnect, and Bumpless IO Using Link Change
3.10
2018
Detection May Fail Using a PNC001-Bxxx as an MRM. Also
includes updates to enhance cyber security.
Redesign hardware and firmware for component
Feb
obsolescence, reduce power requirements and comply with
3.00
2018
EU RoHS.
Adds support for the Genius Communication Gateway's
May
(GCG001) Switch BSM and Enable/Disable Outputs
2.27
2017
COMMREQs.
Supports the Remote Get HART Device Information
COMMREQ. Information from a HART device connected to
Jun
an RX3i Analog Module in an IC695PNS001 RX3i PROFINET
2.26
2016
Scanner may be read into the user application using the
Remote Get HART Device Information COMMREQ.
Supports extended PROFINET device Subslot Numbers to
Nov
support additional 3rd party devices. The maximum Subslot
2.25
2015
Number has been increased from 255 to 21845.
Comments
Jul 2022
8