Emerson PNC001-A Series Important Product Information page 19

GFK-2573AB
Restrictions and Open Issues related to the Command Line Interface
(-Ax Version Only)
Restriction/Open Issues
Invalid help response for invalid
CLI commands
Page function not available
Response to invalid command
entry
telnetd command response
log details command response
term command response
Description
Occasionally, the CLI will return invalid help suggestions if the user attempts to get help
on an invalid command by using the question mark key. Attempting to issue the
command based on this help text will result in an Error: Bad command response from
the CLI.
Use the help command to view a list of available commands.
For more information on available CLI commands, please refer to the PACSystems RX3i
High-Speed I/O LAN Command Line Interface Manual, GFK-2572A or later.
The output paging function, as described in the shConfig command, is not currently
functioning.
The error message displayed in response to an invalid show port help command does
not provide useful information. Example: show port fdp help is an invalid command.
To see a list of valid parameters for the show port command, type show port ?
The CLI does not echo the new number of max connections in its response to the telnetd
<maxconnections> command. However, the command still functions properly and
updates the maximum number of telnet connections.
When displaying numerous local log table entries using the log details command,
sometimes erroneous blank characters appear within the display. Use the log details <log
entry number> command to view the disrupted log table entry. Example: log details 99.
Occasionally, the CLI does not respond to the term command. To recover, restart the
terminal emulation program.
Jul 2022
17