Emerson PNC001-A Series Important Product Information page 14

GFK-2573AB
Subject
PROFINET
Controller version
requirements
Feature
Extended PROFINET device
Subslot Number range
RX3i PNC001 Release 2.20
HART Pass-Through
RX3i PNC001 release 2.11
(or later)
Hot Standby Redundancy
with PROFINET I/O
RX3i PNC001 Release 2.00
Hot Standby Redundancy
with PROFINET I/O
RX3i PNC001 Release 2.00
Non-Hot Standby
Redundancy system
IC695CMM002/004
support in IC695PNS001-
Bxxx, IC695PNS001, and
IC695CEP001
Applications using the
IC695CPE302, CPE305,
CPE310, or CPE330
Version 10.05 (or later)
with a PNC001-Bxxx must
also upgrade the PNC to
Version 3.16 (or later) for
compatibility with the
CPE3xx controller.
Minimum Version Required
CPE330 Release 8.70
CPU320/CPU315 Release 8.70
CPE310/CPE305 Release 8.70
CRU320 Release 8.70
CPE302 Release 9.40
(Other CPU models are not supported)
CPE330 Release 8.50
CPU320/CPU315 Release 8.50
CPE310/CPE305 Release 8.50
CRU320 Release 8.50
CPE302 Release 9.40
(Other CPU models are not supported)
CRU320 Release 8.40
CPE330 Release 8.70
(Other CPU models are not supported)
CRU320 Release 8.00
CPE330 Release 8.70
(Other CPU models are not supported)
CPU320/CPU315 Release 7.13
CPE310/CPE305 Release 7.10
CRU320 Release 8.00
CPE302 Release 9.40
(Other CPU models are not supported)
IC695PNC001-Bxxx 3.20
IC695PNC001-Bxxx: 3.16
Jul 2022
12