Find Quality Products Online at:
3
.
Turn the Power ON/OFF
After installing batteries, press the power button
The Startup screen appears on the LCD for 1 second.
Then the settings for the Measuring button (MEASURE) and Memory
button (MEMORY) are displayed on the Measuring screen for 2 seconds.
To turn the power off, press and hold down the Power button for at least 1
second.
The meter power turns off after the display disappears.
Please wait 3 seconds between repeated power on and power off sessions.
5
Power button
7
Memory button
* By touching the Startup screen, you can
6
Measuring button
NOTICE
●
The blue lettered "SEKONIC" logo
screen is displayed after battery
replacement and 24 hours after
power OFF.
●
Movement of the blue status bar
indicates that the meter is checking
its memory and preparing to operate.
Do not turn the power OFF. Otherwise,
the meter may be damaged.
GlobalTestSupply
www.
5
to start up the meter.
[Startup screen]
[Measuring screen]
immediately skip the screen.
.com
sales@GlobalTestSupply.com