Table of Contents
Advertisement
Setting Up Icons for the Windows Program Manager
Step 4: While the TMS320C2xx Debugger program group is active, from the
Step 5: Select the Program Item option button, then click on the OK button.
Step 6: You can also put emurst into the TMS320C2xx Debugger program
Step 7: Invoke the debugger by double-clicking on its icon.
2-20
Windows Program Manager, select File
This displays the New Program Object dialog box.
This displays the Program Item Properties dialog box. Enter the fol-
lowing information for the 'C2xx debugger:
After entering this information, click on the OK button. This displays
a Texas Instruments icon in your TMS320C2xx Debugger program
group.
group. The program item descriptions and command lines is:
Description
EMURST
After entering the emurst program item, the TMS320C2xx Debugger
program group should look like the following:
New.
Command Line
c:\c2xxhll\emurst –p 240
Advertisement
Table of Contents
