• This appliance is intended to be used in • Make sure not to cause damage to the water household and similar applications such as: hoses. – Staff kitchen areas in shops, offices and other working environments – Farm houses www.zanussi.com...
Warning! Risk of electrical shock, fire or burns. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Control panel A B C On/off button Indicators Programme buttons Delay button Display Function buttons www.zanussi.com...
4) With this programme you can wash a load with fresh soil. It gives good washing results in a short time. Information for test institutes For all the necessary information for test performance. send an email to: info.test@dishwasher-production.com Write down the product number (PNC) that is on the rating plate. www.zanussi.com...
• The display shows the current setting of the water softener, e.g. = level 5. 4. Press function button (A) again and again to change the setting. 5. Deactivate the appliance to confirm the set- ting. www.zanussi.com...
• If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. 5. Set and start the correct programme for the type of load and the degree of soil. www.zanussi.com...
Page 7
4. Start the shortest programme with a rinsing to set (from 1 to 19 hours). phase, without detergent and without • The delay time flashes in the display. dishes. • The delay indicator comes on. www.zanussi.com...
The water softener neutral- Loading the baskets ises these minerals. • Only use the appliance to wash items that are The dishwasher salt keeps the water softener dishwasher-safe. clean and in good conditions. It is important to www.zanussi.com...
Cleaning the filters Dirty filters and clogged spray arm de- Important! An incorrect position of the filters crease the washing results. can cause bad washing results and damage to the appliance. www.zanussi.com...
- The anti-flood device is on. formation that follows for a solution to the prob- Warning! Deactivate the appliance before lem. you do the checks. With some problems, the display shows an alarm code: • - The appliance does not fill with water. www.zanussi.com...
Voltage 220 - 240 V Frequency 50 Hz Water supply pressure Min. / max. (bar / MPa) (0.8 / 0.08 ) / (10 / 1.0 ) max. 60 °C Water supply Cold water or hot water Capacity Place settings www.zanussi.com...
Help protect the environment and human health • Discard correctly the packaging material. Re- and to recycle waste of electrical and electronic cycle the materials with the symbol appliances. Do not dispose appliances marked www.zanussi.com...