Figure 56. Low voltage stranded wire connection
(GEH/V 0.5 to 5 ton)
Follow the steps to connect the stranded wire:
1. Release the spring with a dedicated screwdriver (blade
width 2.5 mm)
2. Insert the stripped cable as far as it gets inserted.
3. Complete the connection by removing the screwdriver.
Figure 57. Deluxe controls low voltage connection
(0.5 to 5 ton)
WSHP-SVX01AC-EN
Figure 58. TP1 connection type
Present on all 0.5 to 5 ton H/V units.
Figure 59. Deluxe controls with WSE two-stage low
voltage connection (0.5 to 5 ton)
1 - (Y2)Compressor/Cool stage 2
Installation
57