Table of Contents
Advertisement
M S-7246 ATX Mainboard
SATA Devices Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
SATA Mode, On-Chip Serial ATA
These 2 items allow you to select the SATA and the ATA/IDE configuration.
For the setting options of SATA Mode, select [IDE] if you want to have SATA as
IDE function. Select [AHCI] to allow the SATA to have Advanced Host Controller
Interface (AHCI) feature, which supports improved serial ATA disk performance
with native command queuing & native hot plug. Select [RAID] to use SATA as
RAID function. Setting options: [IDE], [AHCI], [RAID].
For the setting options of On-Chip Serial ATA, select [Disabled] if you want to
disable all SATA controllers. Select [Combined Mode] to use the SATA and P-ATA
devices but it only supports up to 4 devices. Select [Combined Mode] to use all
the SATA and P-ATA devic es . Select [Auto] to let the s ystem arrange
automatically. Select [SATA Only] to let the SATA operate in legacy mode. Refer
to the following tables for details.
SATA Only
PATA Pri, SATA Sec
SATA Pri, PATA Sec
PATA Only
IDE
AHCI
RAID
SATA PORT Speed Settings
This item let you to select the compatible SATA Spec version. Setting options:
[Disabled], [Force GEN I], [Force GEN II].
PATA IDE Mode
This item allows you to select the parallel ATA channel. Setting options:[Primary],
[Secondary].
SATA Port
This feature allows users to view the SATA port as primary or secondary channel.
3-14
On-Chip Serial ATA (Combined)
[SATA 1/3/2/4]
[IDE1, SATA2/4]
[SATA1/3, IDE1]
[IDE1]
On-Chip Serial ATA (Enhanced)
[IDE1, SATA 1/2/3/4]
[IDE1, SATA 1/2/3/4]
[IDE1, SATA 1/2/3/4],
[SATA support RAID 0/ 1/ 5/ 10]
Advertisement
Table of Contents
