Table of Contents
Advertisement
JM icron RAID Introduction
4. In the Hard Disk Disk List menu, use <Space> key to select the disks you want
to create for the RAID set, then click <Enter> key to finish selection.
5. Then select the strip value for the RAID array by using the "upper arrow" or "down
arrow" keys to scroll through the available values, and pressing the <Enter> key to
select and advance to the next field. The available values range from 4KB to 128 KB.
The default and typical value for RAID 0 is 128KB. (This field only available for RAID
0 mode.)
6-5
Advertisement
Table of Contents
