Table of Contents
Advertisement
Engine Maintenance
Servicing the Air Cleaner
Do not operate the engine without the air-cleaner element. Operating without an
element causes damage to the engine.
1. Rotate the latches
2. Remove the cover
elements.
3. Remove the cover to access the air-cleaner
elements.
4. Remove the foam element
element
5. Service the foam element
A. Wash the foam element in warm water and
detergent.
B. Rinse it and allow it to air dry.
C. Lightly oil the foam element with new oil
and squeeze out excess oil.
6. Service the paper element
Gently tap the paper element to dislodge dirt.
Note:
use pressurized air, as this damages the
element.
Note:
carefully; do not use if the sealing surfaces are bent or damaged.
7. Install the elements.
A. Install the foam element onto the paper element.
B. Install the elements onto the air-cleaner base.
C. Install the cover, and secure it with the latches.
Maintenance: Engine Maintenance
outward.
to access the air-cleaner
from the paper
.
.
.
Do not wash the paper element or
Replace a dirty, bent, or damaged element. Handle the new element
IMPORTANT
G376312
Page 5–7
3462-915 A
Advertisement
Table of Contents
