Toro Ultra Buggy 2500-TS Operator's Manual page 25

Lowering the Hopper without Power (continued)
5. Disconnect the hose fittings in the manifold
block and allow the fluid to drain into the pan.
Note:
recycling center.
6. Connect the hose fittings.
7. Use a hoist or have 2 people hold up the
hopper and remove the cylinder lock.
8. Carefully lower the hopper.
9. After making repairs, install the hoses to the
manifold block fittings.
10. Add hydraulic fluid.
3462-915A
Dispose of the used fluid at a certified
G385185
Page 4–10 Operation: After Operation