Table of Contents
Advertisement
Art 40-60
User guide
System settings
Control
Energy efficiency
Determine how energy efficient your TV set shall be. The value for
the contrast (and thus the brightness of the background lighting) is
adapted and the automatic dimmer activated or deactivated depend-
ing on the presetting.
Call Energy efficiency
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Control,
go to next column.
Mark Energy efficiency,
go to next column.
...
Energy effi-
Home Mode
ciency
Premium
Mode
Shop Mode
Select desired setting and make changes.
OK Adopt settings.
Explanations of the setting options in the energy efficiency
menu:
Choosing Home Mode activates automatic shutdown. For Premium
Mode or Shop Mode, automatic shutdown is initially deactivated.
Home Mode The emphasis for home use is on low energy con-
sumption. The automatic dimmer is activated.
Premium
This mode optimises the settings to a brighter
Mode
environment at a higher energy consumption. The
automatic dimmer is activated.
The use of this energy efficiency setting must be
confirmed afterwards once again.
Shop Mode The picture settings are aligned to operation in the
presentation room. The automatic dimmer is deac-
tivated. If the ambient brightness diminishes, the
energy consumption is not reduced.
The use of this energy efficiency setting must be
confirmed afterwards once again.
The priority here is low energy consumption in home use. In this
case, the TV switches off automatically for the sake of saving
energy, after it has been out of operation for four hours.
Quick start mode
If you enable the Quick Start Mode and you switch on the TV set from
standby, the TV picture can be immediately seen without delay. You
can specify the times at which your device will be in the Quick Start
Mode.
Please note that in this case you will have a higher energy consumption.
Default setting for the Quick Start Mode: off
Call Quick start mode
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Control,
go to next column.
Mark Quick start mode,
go to next column.
Quick start mode
...
Quick start
Here you can specify the times at which your device
mode
should be in quick start mode.
6 am - 9 am
11 am - 3 pm
6 pm - 9 pm
If you choose quick start here, you will see the TV screen immediately and without delay after switching on the TV set
from standby. Note the higher energy consumption in this case.
Select desired setting and make changes.
OK Adopt settings.
Back
on
off
on
off
on
off
95
Advertisement
Table of Contents
