Update Station List Automatically - Loewe Art 60 Manual

Art 40-60
User guide
System settings
Stations

Update station list automatically

Some programme providers offer an automatic update of the sta-
tion lists (Dynamic Channel Management). You may Allow or Block
an automatic station list update. If automatic updating is allowed, a
screen message about an available update appears whenever the
list is changed.
Allow/block updates
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Stations,
go to next column.
Mark Update station list automatically,
go to next column.
... Allow
Block
Select Allow or Block,
OK adopt.
If the channel list is not up to date, it will be updated
automatically, provided the option Allow is select-
ed.
Updating the station list
A message appears whenever the TV is switched on if the network
provider changes their channel list.
In Update station list automatically, Allow must
be selected.
Update station list
Because your network provider has changed its station list, it has to be adapted
on your TV set as well. Please specify when you wish to do this.
At once
After switch off to standby
Later
Proceed with
Select the desired procedure.
If the channel list is not up to date, it will be automatically
updated provided the parameter "Allow" is selected.
At once The station list will be immediately updated. Normally
this occurs in the background without interfering
further with the TV's operation. In exceptional cases,
it is however possible that during this process an au-
tomatic station change may be necessary.
After switch The channel list will be updated the next time the TV
off to set is switched off into standby mode.
standby
Later Updating the channel list will be postponed to a later
date. When the TV set is switched on and off, the
update message will appear again.
OK Confirm selection.
91