Energy Efficiency; Quick Start Mode - Loewe bild series User Handbook Manual

Loewe bild
User handbook
System settings
Control

Energy efficiency

Determine how energy efficient your TV set shall be. The value for
the contrast (and thus the brightness of the background lighting)
is adapted and the automatic dimmer
depending on the presetting.
Call Energy efficiency
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Control,
go to next column.
Mark Energy efficiency,
go to next column.
Select desired setting and make changes.
OK Adopt settings.
Explanations of the setting options in the energy efficiency
menu:
Home Mode The emphasis for home use is on low energy
consumption. The automatic dimmer is activated.
The TV set switches off automatically for the sake
of saving energy, after it has been out of operation
for 4 hours.
Premium This mode optimises the settings to a brighter
Mode environment at a higher energy consumption. The
automatic dimmer is activated.
The TV set switches off automatically for the sake
of saving energy, after it has been out of operation
for 4 hours.
Shop Mode The picture settings are aligned to operation in
the presentation room. The automatic dimmer is
deactivated. If the ambient brightness diminishes,
the energy consumption is not reduced.
Any changes made are reset to the defaults after
30 minutes.
4 h switch- If you disable the timer, the TV set will no longer
off timer automatically switch off after 4h without operation
to limit the increased energy consumption.
(1 Availability varies by device type (see chapter Technical data - equipment features for your TV set).
104
(1 activated or deactivated

Quick start mode

If you choose to activate the quick start mode, you will see the TV
screen immediately after each switching on of the TV set and without
any waiting time. You can specify the times at which your device will
be in the Quick Start Mode.
In this case, please note the higher power consumption (see chapter
Technical data) and thus a higher annual energy consumption.
Default setting for the Quick Start Mode: no
Call Quick start mode
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Control,
go to next column.
Mark Quick start mode,
go to next column.
Select desired setting and make changes.
You can individually change the suggested
times.
OK Adopt settings.