Setting The Volume; Select Station - Loewe bild 9 Operating Manual

Loewe bild 9
Operating manual
TV
Volume / stations
TV
Via the menu item TV, which is selectable via the Home view, one
station can be selected from the current station list. By selecting a
station you will arrive in the TV mode.
In the TV mode there are a number of functions, such as Teletext, PIP,
EPG available to you. Via the individual function lists you can select
additional options and settings surrounding the TV operation.

Setting the volume

Switching sound off/on
Sound off.
Sound on: Press key again or increase the volume
using V+.
Setting the volume
V+/V– Volume up/down.
The volume indicator will be displayed in the center of
the screen.
The volume control bar can be deactivated in the
menu System settings
On-screen displays.

Select station

Select station with P+ / P–
When using Instant Channel Zapping, you can very quickly switch to other
stations. The instant channel zapping technology uses the second tuner
in the background in order to pre-select the next stations. Due to this
pre-selection, you can now switch to this channel within a very short time.
While using the digital recorder DR+ (timeshift operation, archive
recording, multi recording) or in PIP mode, Instant Channel Zapping
is not available. Switching is done at „normal" speed.
For encrypted stations Instant Channel Zapping is only possible to
a limited extent.
P+/P– Station up/down.
The number and the name of the station along with the
title of the programme and that of the next programme
will be briefly shown. Also, the status display with time/
date and programme-dependent symbols appears.
The symbols of the status display are described in
chapter TV, section Status display.
Select station using the numerical keys
If you select an unoccupied station position, the next available
station is selected.
1-digit stations
Press the numerical key a little bit longer: The channel
long
will change immediately or press the numerical key
briefly, the station changes after 2 seconds (changes
immediately if up to 9 stations are stored).
2-digit and 3-digit stations
Press first (and second) numerical key briefly. Keep the
last numerical key depressed a little bit longer: The
short short long
channel will change immediately or: press all the numer-
ical keys briefly, the channel changes two seconds after
the last number has been entered (with up to 99 or 999
saved channels it will change immediately).
4-digit stations
Press all four numerical keys briefly, the station
changes immediately.
all short
16
Selecting a station out of the station list
Changing the station list
Control more ...
Explanations of the station lists:
The number and the names of the possible station lists depend on
the available signal sources (antennas, TV reception networks, etc.).
ASTRA LCN
Personal list Only stations of the selected personal list are indicated
Manage list Call up the station list editing menu (System
In normal TV mode, without other displays:
OK Call station list.
Mark stations.
OK The marked station will be called.
In normal TV mode, without other displays:
OK Call station list,
MENU: Call function list.
Mark station list selection.
OK Call.
Mark desired station list.
OK Call.
The station list is amended according to selection.
BACK: a long press: Close overlay.
Only stations from the selected source / reception
Analogue network are indicated in the station list.
DVB-C
DVB-T
in the station list. The name of the list may be changed.
AV list Exclusively AV inputs are shown in the station list.
settings Stations Station lists TV).
continued on the next page