This Appliance Must Be Earthed; Fitting A Different Plug - Blomberg GSN9123 User Manual

Installation
A
This appliance must
be earthed
If the fitted moulded plug is
not suitable for your socket,
then the plug should be cut
off and an appropriate plug
fitted.
Destroy the old plug, which
is cut off as a plug with a
bared cord could cause a
shock hazard if inserted into
a socket elsewhere in the
house.
The moulded plug on this
appliance incorporates a
13A fuse. Should the fuse
need to be replaced an
ASTA approved BS1362
fuse of the same rating must
be used. Do not forget to
refit the fuse cover. In the
event of losing the fuse
cover, the plug must not be
used until a replacement
fuse cover has been fitted.
Colour of the replacement
fuse cover must be the
same colour as that visible
on the pin face of the plug.
Fuse covers are available
from any good electrical
store.
Dishwasher / User manual

Fitting a different plug

As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals on your plug,
proceed as follows:
1. Connect the green - yellow or
green (earth) wire to the terminal
in the plug marked 'E' or with the
symbol
and yellow or green.
2. Connect the blue (neutral) wire to
the terminal in the plug marked 'N'
or coloured black.
3. Connect the brown (live) wire to
the terminal in the plug marked 'L'
or coloured red.
Green and yellow
or green
N
Blue or
black
With the alternative plugs a 13A fuse
must be fitted either in the plug or
adaptor or in the main fuse box. If in
doubt contact a qualified electrician.
or coloured green
L
Brown or red
11 / 38 EN