Table of Contents
Advertisement
5
Operating the product
1. Programme Starting Point
2. Rinse Aid indicator
3. Salt indicator
4. On/Off Indicator Light & Progress
Indicator Lights
On/Off
Machine will be switched on when you
move the Programme Selection key to
position "1". "ON" light will illuminate.
Machine will be switched off when you
move it to "OFF" position. All lights will
turn off.
Programme selection Key
Used to switch on/off the machine and
select the washing programmes.
Half Load key
Select Half Load when using any wash
programme [Except Prewash] to save
on water, electricity and time if the
machine is only half full. You can place
dishes anywhere in the machine; some
upper and some lower basket.
Start / Stop key
It is used to start, pause or cancel the
selected programme.
When you press the Start / Stop key,
the washing programme you have
selected will start.
A
To press the Start / Stop key,
wait for two seconds after
you turn on the machine.
/38 EN
24
1
7
5. Start / Stop key
6. Half Load key
7. On/Off/Programme Selection Key
Starting your machine
1. Open the tap.
2. Plug in to the socket.
3. Open the door of the dishwasher.
4. Place the dishes in accordance
with the instructions in the user
manual.
5. Make sure that the upper and lower
impellers rotate freely.
6. Put sufficient amount of detergent
in the detergent dispenser and
close its lid.
7. Check if the Salt and Rinse Aid
indicators light and add salt and /
or rinse aid if needed and close the
door of the machine.
9. Select the most suitable
programme by using the table of
"Programme Data and Average
Consumption Values".
10. Select the desired programme with
Programme Selection key.
11. Start the programme by pressing
Start / Stop key.
Dishwasher / User manual
2 3
4
6
5
Advertisement
Table of Contents
