Electrical Connection; This Appliance Must Be Earthed - Blomberg LDV02284 User Manual

Installation

Electrical connection

Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket in a
readily accessible position.
If the supply cord or the mains lead
is damaged please do not replace it
yourself. The supply cord or the mains
lead must be replaced by a Authorised
Service Agent or a similarly qualified
person.
Dishwasher / User manual
A
This appliance must
be earthed
If the fitted moulded plug is
not suitable for your socket,
then the plug should be cut
off and an appropriate plug
fitted.
Destroy the old plug, which
is cut off as a plug with a
bared cord could cause a
shock hazard if inserted into
a socket elsewhere in the
house.
The moulded plug on this
appliance incorporates a
13A fuse. Should the fuse
need to be replaced an ASTA
approved BS1362 fuse of
the same rating must be
used. Do not forget to refit
the fuse cover. In the event
of losing the fuse cover, the
plug must not be used until
a replacement fuse cover
has been fitted. Colour of
the replacement fuse cover
must be the same colour as
that visible on the pin face
of the plug. Fuse covers
are available from any good
electrical store.
11 / 44 EN