Daikin DAR09 Service Instructions Manual page 20

PRODUCT IDENTIFICATION
A- SINGLE PIECE AIR HANDLER S- ENERGY EFFICIENT MOTOR U NPAINT ED F LOWRATOR
M o d l e R / e v
ASUF29B14AA
ASUF39C14AA
ASUF49C14AA
ASUF59D14AA
ASUF49C14AB
ASUF59D14AB
ASUF59D14ACF
ASUF59D14ADN
ASUF29B14AB
ASUF39C14AB
ASUF49C14AC
ASUF29B14AC
ASUF39C14AC
ASUF49C14AD
A SINGLE PIECE AIR HANDLER CEILING MOUNT N-UNCASED FLOWRATOR
Model/Rev
ACNF****1AA
ACNF****16AA
ACNF****1AB
ACNF****1BA
ACNF****1DA
MODULAR BLOWER AIR HANDLER R-MULTI-POSITION PSC MOTOR
Model/Rev
MBR****AA-1AA
MBR****AA-1AB
MBR****AA-1AC
MBR****AA-1AD
Initial release of models in the mid-range efficiency air handler. Incorporates smart frame
chassis with EEM (X-13) style motors and piston type flowrators.
Initial release of mid-range efficiency air handler with X-13 motor & fixed orifice flowrator.
9 mm return bend coil.
our row, piston, 9 mm return bend coil.
idec Pre-programmed Motor. Nidec motor can be programmed by the supplier.
Programmed Broad Ocean Motor. The supplier can program the motor.
Changed from X13 Motor IP to IGBT (Broad Ocean).
Initial release of 13 SEER Dayton uncased air handlers.
Initial release of 13 SEER Dayton uncased air handlers suitable for use with R-22 and R-
410A
Drain pan material change to a Decabromodiphenyl Ether free resin.
Initial release of louvered fin design.
Initial release of models with aluminum coils,manifolds, hairpins, flowrators, 90 degree
flowrator stub and 5/16" return bends. Models suitable for use with R-22 and R-410A.
Initial release of a module blower with PSC blower motor.
A quality improvement to use 0.75" Quiet Flex Insulation.
Release of MBR/MBVC Models(Minor Revisions) for 11th St Plant. Dayton to Houston
Add permanent sealing/condensation-control upgrades to all MB units and remove high-
voltage knockouts
ASUF
D e c s i r t p o i n
ACNF
Description
MBR
Description
20
AIRHANDLERS